Search
Close this search box.

Wireless HD Transmitter and Receiver

Model No.: WMU1212

Wireless HD transmitter and receiver 4K powered by the latest H.265 hardware engine, which presented a bit reduction of 64% at 4K wireless transmission, with better video quality.

Supports 4K60 ultra-resolution. Beyond the four times resolution of 1080P, 4K means the images you see will be incredibly realistic. Wireless HD transmitter and receiver also support 4K60 HDMI loop-out with HDR, with a broader range of colors and contrast.

With several times faster and much higher speeds, 802.11 ac MIMO technology enables the 4K UHD streaming to become a reality.

Built-in 2*5db high-sensitive antennas allow the video signals to travel farther and provide a stable connection.

Key Features of Wireless HD Transmitter and Receiver 4K60

Our latest 4K60 wireless HDMI transmitter and receiver is coming

video encode and decode chipset

vPlay Seamless Protocol

Relying on our new innovative vPlay Seamless protocol, the wireless streaming become very smoothly, no stutter issue, no audio and video sync issue.

the transmitter and receiver auto pairing and auto connection

Auto Connection

Compatible with any devices with the HDMI port (blu ray players, cable boxes) and no messy cables, The wireless HDMI transmitter and receiver will connect automatically after power on.

streaming set top box video to living room

Long Transmission Distance

Built-in 2T2R Wi-Fi module and 2*5db high-sensitive antennas create a stronger connection over long stance, ensuring up to 200 meters distance in the clear line of sight.

support 4K60 high resolution streaming quality

4K60 High Resolution

The Wireless HDMI Transmitter and Receiver supports 4K60 resolution, which has four times more pixels than 1080p, delivering fantastically clear pictures, bring you a cinematic experience.

video transmit from one transmitter to multiple receivers

Multi Cast Supported

Support wireless HDMI transmitter with multiple receivers without latency, up to 4 receivers,  which is excellent for applications like education or digital signage.

Support 38-56KHz IR extended function

KVM Function

Support USB KVM, touch panel back control and IR extended function, it’s easy for user to control the video source by mouse, keyboard, and remote control from another room. 

Technical Specification

Model No.:

WMU1212

WMF1212

End to End Latency:

As low as 100ms

As low as 100ms

Maximum Resolution:

4K60

1080P60

Audio Formats:

PCM stereo

PCM stereo

HDMI & HDCP Version:

HDMI 2.0 & HDCP2.3

HDMI 1.3 & HDCP1.4

Wireless Standard:

802.11 AC, 5GHz, 2T2R MIMO

802.11 AC, 5GHz, 2T2R MIMO

Distance:

150 Meters in the clear line of sight

200 Meters in the clear line of sight

Video Compression:

H.265

H.265

Multi-cast:

Support 4 receivers at the same time

Support 4 receivers at the same time

USB KVM/Touch Panel:

Supported

Supported

IR Extender Function:

20-60KHz

20-60KHz

Power Supply:

5V2A

5V2A

Dimensions (H x W x D)

155x78x23mm

155x78x23mm

Frequent Questions and Answers

Put the wireless HDMI transmitter, and the wireless HDMI receiver close together to see if they connect properly, and check whether all settings are set correctly.

  • Ensure the power of the wireless HDMI transmitter and receiver is properly connected. Make sure all HDMI cables are plugged into the correct devices. If they aren’t, then replace them.
  • Make sure that the HDMI source is switched on and the right HDMI input is selected on the TV.
  • Make sure that the HDMI source has the right resolution. If necessary, check the user manual of your HDTV source.
  • Unplug the power adapter cords from the wall socket and plug them back into the transmitter and receiver again.

If the transmitter and the receiver still don’t connect, follow these steps for pairing.

  • Turn on the transmitter.
  • Turn on the receiver until it shows up on the main screen.
  • Hold the receiver’s RESET button for five seconds until the LED flashes rapidly.
  • Wait for 60 seconds for pairing.